BEA WebLogic Server 7 Bedienungsanleitung PDF herunterladen (Seite 16)

Deploying F5 with BEA WebLogic Server 10.0

F5 Deployment Guide 14

Creating the virtual server

Next, we configure a virtual server that references the profiles and pool you

created in the preceding procedures.

To create the virtual server

1. On the Main tab, expand Local Traffic, and then click Virtual

Servers. The Virtual Servers screen opens.

2. In the upper right portion of the screen, click the Create button.

3. In the Name box, type a name for this virtual server. In our

example, we type weblogic-server.

4. In the Destination section, select the Host option button.

5. In the Address box, type the IP address of this virtual server. In our

example, we use 192.168.10.100.

6. In the Service Port box, type 443.

Figure 7 Creating the WebLogic virtual server

7. From the Configuration list, select Advanced.

The Advanced configuration options appear.

8. Leave the Type list at the default setting: Standard.

9. From the Protocol Profile (Client) list select the profile you created

in Creating the WAN optimized TCP profile. If you did not create a

WAN optimized profile, select the LAN optimized profile as in the

following Step. In our example, we select wls-wan.

10. From the Protocol Profile (Server) list, select the profile you

created in Creating the LAN optimized TCP profile. In our example,

we select wls-lan.

11. From the OneConnect Profile list, select the profile you created in

Creating a OneConnect profile. In our example, we select

wls-oneconnect.

12. From the HTTP Profile list, select the profile you created in

Creating an HTTP profile. In our example, we select wl-http-opt.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

Keine Kommentare

BEA WebLogic Server 7 Bedienungsanleitung Seite 16